Precautions for maintenance of small precision punching machines

Attention should be paid during the maintenance of small high speed presses: ensure that the locking and opening process is performed correctly to ensure the safety of maintenance personnel, and ensure that the sleeve is placed at the bottom of the stroke before performing brake maintenance work. If this is done, there is no need to lock the sleeve anymore. Including small precision press operators in the maintenance process enables them to alert maintenance or management staff when problems arise. They operate small precision presses on a daily basis, so it is easier to hear or see symptoms of problems. Just as it is the first thing an unusual sound is noticed by driving the same car every day, the same is true for the operator.
Workshop environment control: A clean small precision punching machine can enable operators or maintenance personnel to quickly find out when problems occur. For example, oil leakage, air leakage, fracture, etc., if the small precision punching machine is clean, it is easy to find out its location.
Leave the electrical work to the relevant professionals: Only qualified electrical technicians can maintain the electrical circuit of the small precision press, but you can still check whether the light bulb on the control panel of the small precision press is normal, every shift It is necessary to ensure that the bulb is working and correctly display the various operating conditions of the small precision punching machine.
Make sure your press is in a balanced position: A press that is finely balanced will perform better, so it's best to have an annual inspection. The pneumatic system is responsible for the operation of the pneumatic brake and the balance system. It is necessary to check whether there is any gas leakage, because part of the proper air pressure can affect the performance of the brake and balance system, and they control the stop time of the small precision punching machine. Once a problem occurs, it will cause Operator and equipment are in danger. Additionally, all pneumatic systems have regulators, lubricators and water reservoirs. Water that accumulates in gas lines should be drained daily.

Replace lubricating oil and filter screens for a period of time: Improper maintenance of the lubrication system of small precision presses is also one of the main reasons for small precision press downtime. The filter screen is not regularly replaced when the circulating oil system is in operation. It should be ensured that the filter screen is replaced at the same time as the oil is replaced, and it needs to be replaced frequently in normal times.