What are the steps of mold adjustment for high speed punch press?

1. Manual mold adjustment: high speed punching machine is composed of ball screw, pinion gear, large gear, digital display transmission gear, digital display transmission shaft, ball gland, external digital display device, overload cylinder and inner base. It is suitable for precision punching machines of 60T and below. The adjustment method is: first use the hook wrench to loosen the fixing screw to the right. Secondly, take out the ratchet handle and put it on the slider adjustment rod. If the height of the mold (that is, the closing height) needs to be increased, turn the handle clockwise.
2. If the height of the mold (that is, the closing height) needs to be lowered, turn the handle counterclockwise, and at the same time, the correct degree of the slider can be seen from the mold height indicator to make fine adjustments. Finally, after multiple adjustments to determine the optimum die height, use the hook wrench to lock the screw to complete the die height adjustment of the precision punching machine.

3. Electric mold height adjustment: The electric mold height adjustment device with digital mold height indicator is used as standard, and it is generally suitable for precision punches of 80T and above 80T; the adjustment method is: adjust the slider of the punch press to select Put the button in the "ON" position. If the height of the mold (that is, the closing height) needs to be lowered, press the "slider down" button, watch the "mold height indicator", and release the button when it is adjusted to a suitable height That's it. If the height of the mold (closed height) needs to be increased, press the "slider up" button, watch the "mold height indicator", and release the button when it is adjusted to a suitable height.