Why do high-precision punch presses use lubricating oil?

Friends who have used fast precision punching machines know that it is unlikely that grease will not be used in the production of precision punching machine industrial equipment. If the grease breaks, the die base, the die, the die base of the automatic punching machine and the production and processing raw materials are in direct contact, which will not only destroy the mold shell, but also continue to become waste. Naturally, because the content of the production and processing information of the rapid precision punching machine is different, the oil that must be used is also different. Pay attention to the following three points when applying grease:
1. Lubrication method.
2. Improve the storage of grease in the mold shell.
3. Selection of grease.
For the operation process of the precision punching machine industrial equipment, a sprayer is used to blow a layer of oil film that is jointly distributed on the surface of the raw materials for production and processing. On the continuous mold, the grease should be accurately delivered to the working median value of each forming process, and the raw material table for production and processing should be close to the grease delivered by one layer.
Set on both sides of the plate ring protrusion, each schedule the grease that sticks to the production and processing raw material can reach the cold die seat. Return equipment and tooth pattern nuts should have corners rounded. When the mold shell is closed, a layer of floating oil is sewn on the top of the mold base and the production and processing material, and the lower part of the return equipment and the production and processing material. In the entire production process of the precision punching industrial equipment, this kind of grease is not only sent to the wound of the chess set, but also to all the theme moving surfaces, especially the assistant station in the forming area. The harmonious characteristics of the grease must be integrated into the overall production and processing goals according to the characteristics of the production and processing plastics, the thickness and the difficulty of production and processing of the product shape. In fact, in iron, stainless steel, copper, aluminum, etc. box punch.

There are more than ten kinds of lubricating greases used in precision punching industrial equipment. In the production of metal materials, along with the differences in specifications such as the thickness of raw materials, compressive strength, the difficulty of production and processing of the product shape, and the pressure of forming production and processing, it is necessary to Choose the appropriate type of grease from several types of grease. This maximizes the power of a precision punch, which can produce rapid metal products.