Causes and solutions of lubrication failures in high speed punch machines

Failure of the high speed punch lubrication system may be caused by many reasons. The following are some possible causes and solutions:

Oil contamination: Excessive impurities and moisture in the oil cause oil contamination and affect the lubrication effect.

Solution: Change the oil regularly and ensure that the oil tank and pipes are clean to avoid the entry of impurities and moisture.

Oil pipeline blockage: There is a blockage in the oil pipeline, causing the oil lubrication system to not work properly.

Solution: Clean or replace clogged oil pipes.

Oil lubrication pump failure: The oil lubrication pump is damaged or malfunctions and cannot supply oil normally.

Solution: Repair or replace the damaged oil lubrication pump.

Insufficient pressure in the lubrication system: Insufficient pressure in the lubrication system cannot provide enough oil to lubricate components.

Solution: Check the lubrication system pressure and repair or replace components with insufficient pressure.

Oil lubrication pipeline leakage: Oil lubrication pipeline connections or oil seals leak, causing oil lubrication to not work properly.

Solution: Repair or replace leaking oil lubrication lines or oil seals.

Other reasons: Failure of other components in the lubrication system or improper design.

Solution: Check and repair according to specific conditions to ensure that the lubrication system is working properly.