How to reduce the occurrence of precision punch failures

Nowadays, the utilization rate of high speed precision punching machines is getting higher and higher. However, many customers do not know how to maintain and maintain them, which may cause damage to their abrasive tools. In fact, the long-term unscientific and practical operation is not only harmful to grinding, but also It can also lead to bad effects on the service life of the small punch. Today, let's take a look at how to reduce the occurrence of small punch failures?

1. Lubrication of each position of mechanical equipment

Lubrication is one of the effective measures to reduce the failure of small punches. Therefore, in order to effectively select the lubricating fluid, it is necessary to select the matching lubricating grease or lubricating grease according to the different application conditions, and grasp the quality and remaining oil that is suitable for you, and select the matching quality grade and model according to the regulations of the equipment. When using a precision punch press, neither low-grade greases nor other types of greases can be used instead, and counterfeit and shoddy greases cannot be used.

2. Timely maintenance

The failure of the equipment should be solved in time, and various maintenance and repairs must be carried out in accordance with the equipment regulations. Timely and irregular maintenance, immediately grasp the operation of the equipment, and solve the small faults that occur temporarily, without delaying maintenance opportunities because of small faults and not affecting the application, resulting in higher faults and even safety production accidents.

3. The operator's responsibilities and authority are reduced and the fault

First of all, according to the regulations of the inspection and repair system, an effective division of responsibilities is carried out for post inspections and technical professional inspections, and then the corresponding obligations are established. Obligation will lead to work pressure, and work pressure will create driving force, so that the work can be carried out smoothly; secondly, the necessary incentive system and incentive and restraint mechanism must be formulated, so that the position inspection can continue to develop.

4. Normal working load

It should be noted that it is not possible to work under a larger load than the precision punch brand can withstand, and the equipment should be applied under the premise of its ability. It is necessary to ensure the symmetrical addition and subtraction of the equipment load as much as possible, so that the equipment is in a relatively gentle load change, and avoid the ups and downs of the reducer and the lifting mechanism.